Aspire Skystar 210W TC with Aspire Revvo Sub ohm Tank
Aspire introduces the Skystar 210W TC Box Mod with the Revvo Sub-Ohm Tank; The Skystar is capable of running up to 210W, features a touch screen interface, and has a full temperature control suite. A 1.3 inch touch screen displays essential information, users can browse through the device's interface by swiping the screen or utilize a live clock by tapping the screen. The Skystar has a magnetic battery access door that accepts two high amperage 18650 batteries (sold separately) and can be charged at a 2A maximum current. Included with the Skystar 210W TC Starter Kit is Aspire's Revvo Sub-Ohm Tank, a 24mm, threaded top fill system with an innovative spring loaded fill system and the new horizontal orientated ARC (Aspire Radial Coil) coil head. A single spring loaded fill port is used to fill the tank, which is capable of holding up to 3.6ml of E-Liquid. The Revvo Sub-Ohm Tank utilizes the ARC Coil Family that features a unique stove top style coil system, capable of running 50 to 100W but recommended to be used at 80 to 85W. Airflow enters the Revvo Sub-Ohm Tank via triple top adjustable airflow, measuring at 10.5mm by 2.5mm each airslot and can be fully closed. A 12mm wide bore drip tip acts as the drip cap for the Revvo. Aspire's Skystar 210W TC Starter Kit with Revvo Sub-Ohm Tank is a great choice for newer vapers looking for a starter setup!
Features and Specs for Aspire Skystar Mod:
- Dimensions:3-5/8" x 2" x 1-1/4"
- 5 to 220W Output Range
- 0.1 to 0.5 ohm Atomizer Resistance Range
- 0.5 to 9.0V
- Bypass mode
- Preheat Function
- Firmware Upgradeable
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS316L Support
- Adjustable Three Memory TCR
- Fine Tune Temperature Output
- CPS (Customizable Power Settings)
- Preheat Functionality
- Resistance Lock
- 200 to 600 Degree Fahrenheit Range
- 1.3 inch Touch Screen
- Automatic Display Adjustment
- Output Temperature
- Output Wattage
- Output Voltage
- Material and Mode Selection
- Atomizer Resistance
- Output Current
- Individual Battery Life Indicator
- Real Time Clock
- Adjustment Lock
- On Board Charging
- 2A Max Charge Current
- Micro USB Update and Charge Port
- Magnetic Battery Access Door
- Gold Plated Connections
- Utilizes (2) High Amp 18650 Batteries (Sold Separately)
- Stainless Steel 510 Threading
- Spring Loaded Gold Plated Contact
- Automatic Cut Off/Short Circuit Protection/Overheat Protection/Over Charge Protection/Over Discharge Protection/Reverse Polarity Protection
Please note: Temperature control requires the use of nickel, titanium or stainless coils.
Features and Specs for Aspire Revvo Sub-Ohm Tank:
- Dimensions: 1-3/4" x 1"
- 24mm Diameter
- Stainless Steel Protective Glass Sleeve
- Threaded Top Fill
- Single Spring Loaded Fill Port
- 3.6ml Tank Capacity
- Triple Top Adjustable Airflow
- 10.5mm by 2.5mm Each Airslot
- Fully Closeable
- ARC (Aspire Radial Coil) Coil Family
- Horizontal Orientation
- 0.10 to 0.16 ohm
- 50 to 100W
- 80 to 85W Recommended
- Kanthal AF Wire
- Organic Cotton
- Drip Tip Acts as Drip Cap
- 12mm Wide Bore
- Stainless Steel and Glass Construction
For standard/high resistance atomizers or restrictive devices (ex. pod based/pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer/tank. Preference may vary depending on the user and frequency of use.
Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. CHECK YOUR AMPS, and be safe! Any questions please contact us.
Battery Safety Warning:
Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.
Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.
Always charge in or on a fire-proof surface. Never leave charging batteries unattended.
Do not modify batteries or chargers in any shape or form.
Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and/or fire.
Store your batteries away from the sun and heat to prevent overheating your batteries.
Please be sure to inspect your battery before use to ensure it is not damaged including tears / rips in the battery wrap. Discontinue use immediately if battery is damaged.
Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.
NettMix Custom Vapes Inc. will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.