Kanger CLOCC Replacement Coil Ni200 0.15ohm

$20.00
(No reviews yet) Write a Review
SKU:
CLOCC NI200 0.15ohm
Shipping:
Calculated at Checkout
Replacement Coil / Atomizer Heads for Kanger CLTANK & CUPTI All in one mod  


CLOCC (Organic Cotton Coils):

Nickel (Ni200) must be used in Nickel Temperature Control Mode:

  • Ni200 - 0.15 ohm (Please note, the Ni200 Atomizer Head is not compatible with the EVOD PRO)


Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.

Warning:
Risk of battery Explosion! Nickel (Ni200) are designed for use only with devices equipped with circuit boards capable of controlling coil temperature, such as DNA 40 Mods. Do not use this product with any other devices.

Warning: This is a sub-ohm resistance atomizer. It will only work on a mechanical mod or a mod capable of firing an atomizer of 0.5ohm or lower. You must be sure that your mod AND batteries can handle SUB OHM coils. If you're using a regulated mod, make sure it can handle the amps. For mechanical mod users, please use 20 amp batteries or higher. CHECK YOUR AMPS, and be safe! Any questions please contact us.

Please Note: This product is not covered by warranty and cannot be exchanged.
 
 NettMix Custom Vapes Inc. will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
 
 
Package Contents:
  • 5x Kanger CLTANK OCC Atomizer Head Ni200 0.15ohm