Replacement Atomizer Coil for Aspire Atlantis (V1), (2.0), Mega & Triton
Not Compatible with Aspire Nautilus and Aspire Nautilus Mini
Please note: The 0.3 ohm coil is not recommended in the Atlantis (v1) due to the lack of airflow & cooling.
Also 0.4ohm, 0.3ohm, & 1.8ohm Not recommended for Atlantis V1
Ni200 0.15ohm for Triton & Atlantis 2 & Mega Temp Control - For Temp control mods only!!!
Warning: This is a sub-ohm resistance atomizer. It will only work on a mechanical mod or a mod capable of 30 watt or higher. You must be sure that your mod AND batteries can handle SUB OHM coils. If you're using an electronic mod, make sure it can handle the amps. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email. Known Compatible devices: Mech Mods, Sigelei 30W, 50W, 100w, 150w, DNA 30, Cloupor T8, Kamry 180w, IPV3, IPV2, IPV 4 & 4S, Evic- VT, Vapor shark, Istick 50w, 40w TC, 100w, Vamo7 35W, SVD 2.0 20w
Please Note: This product is not covered by warranty and cannot be exchanged.