Vision Spinner 2 VV Battery Clearance item AS-IS No Warranty
Approx. dimensions: 4-15/16"L. x 5/8"D.
This is the highest capacity variable voltage eGo available today! Vape at your desired voltage! Higher voltage = More vapor! The Vision Spinner is compact making it the most portable variable voltage device available. Don't forget the high capacity battery cell... Vape for hours on a single charge!*
- Upgraded button with battery charge indicator: White light ~ 60%-100%, Blue light ~ 30%-60%, Orange light ~ 0-30%
- New Upgraded and stable PCB control Board
- More comfortable and ergonomic spin dial for adjusting the voltage
- Brand New and upgraded Battery Cell (which makes the Spinner II even more Powerful)
- Longer Lasting Life span due to the New upgraded PCB circuitry And Battery Cell
- Cutoff Time: Approximately 8 seconds
The Spinner has a dial located at the base of the battery. The Spinner has four markings to indicate approximate output voltages at 3.3, 3.8, 4.3, and 4.8 volts but is adjustable throughout the entire voltage range. Simply turn the dial to your desired vaping voltage. It features an easy to read numbered dial.
Please Note: The Spinner 2 will not include a Warranty it is an "AS-IS" item
For information regarding the manufacturer's warranty, contact Vision directly in the link below: http://www.visionecig.com/content/5-contact-us
*Please Note: Results may vary. Using the battery at a higher voltage output will drain the battery quicker than when using it at a lower voltage. Standard eGo series batteries output a regulated voltage of approximately 3.2v.
510 Threaded: Compatible with all of our eGo Series atomizers and cartomizers, 510 Series atomizers and cartomizers. Charge this battery using a Ego 420usb charger.
Variable Voltage Output: Voltage can be adjusted from 3.3V~4.8V Short Circuit Protection: When a short is detected, the battery will shutdown until the short is removed.
Lockable: Press the button 5 times within 1.5 seconds to lock or unlock the battery. The battery LED will blink when switching modes. When the battery is in lock mode, the button is disabled and the battery will not power an atomizer or cartomizer. Atomizer Protection/Cutoff Timer: If the button is depressed for 10 seconds, the battery will shutoff until the button is released.
Battery Monitoring/Over-Discharge Protection: The device will monitor the battery voltage and automatically turn off when the battery is discharged, preventing damage to the battery by overly depleting it. The LED will blink 5 times indicating that a charge is need.
NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous
NettMix Custom Vapes will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
Do not charge on a computer. Always charge with a 1a wall adapter (Do not use wall adapters used for smart phones)